Winterize basement windows

The basement of a country house – one of his major premises. In a country house it can be used for technical needs – the garage, boiler room, water meter unit, Laundry facilities. Or for leisure, placing in a swimming pool, billiard room, sauna, gym, wine cellar, workshop and other auxiliary premises (storage rooms, etc.), which you would not like to see in the first or higher floors of a cottage or a bath. See below to learn more about Winterize basement windows

The basement as technical facilities allows to host the area necessary engineering structures to house, for example, the heating system (boiler), water heaters, filters and more. This will allow you to free up space in the rooms (for example, to get rid of the boiler in the kitchen). Browse some photo of Winterize basement windows

Before you begin construction, you should accurately determine the size of the basement. They can be very different and depend on the design solutions of the future home and the preferences of the owner. When excavation experts do not recommend to deepen a basement in the ground to full height.

Preparation of preliminary designs of the basement includes the following information: basic drawings, taking into account the layout of the site of construction, number of storeys and basic dimensions of the future construction, the existence of additional add-ins, presence of a basement and the inspection pits and their characteristics. Is determined by the configuration of the entrance gate, the presence of additional inputs. Given the calculation of insolation considers the number, size and location of window openings. Also, the thumbnails in the design of the garage should be taken into account the individual layout of internal areas, taking into account the wishes and needs of the customer.

When choosing a Foundation you need to consider several factors: type of soil, the total area of the future construction, the materials used, the ability of the excavation, the presence of a cellar under the extension. As the basis can be chosen tape or pier Foundation.

All construction works should start with marking the site and the completion of the excavation for the Foundation. If the markup is verified, you can start digging trenches for the Foundation. Around the perimeter of the house trenches have the same depth and width. When the desired height of the basement in the 1.7-1.9 m depth of the trench should be about 1.7 m. the Excavated earth should be ignored on the outside, then it will be used in backfilling. When digging trenches, you must carefully monitor the quality of walls: they should be smooth and have no ledges that could lead to the collapse of the soil.

Distinguish waterproofing of vertical and horizontal. The first is designed to protect the Foundation walls, the second, respectively from the water coming from the depths of the soil and affecting the floor of the basement. Before designing a you must carefully examine the composition of the soil, depth of frost penetration and the level of occurrence of water.

The most reliable will be a monolithic wall. They still at the stage of creating the armature plate make the vertical reinforcement bars: outer – length 1.5-1.7 m, inner 1.2-1.3 m. When the base plate attains 70% of its strength, continue to knit the reinforcing frame in accordance with the project. Reinforced inner and the outer walls serve as ribs for slab Foundation. Height of basement walls may be different, depending on the destination premises.

If you need to reinforce the basement walls, we can handle the work independently, without resorting to expensive services. The main thing – to know the technology and features of the reinforcement, monolithic walls. By adding a simple reinforcement concrete becomes more durable and reliable concrete. This applies when the device bearing structures (such as walls of buildings).

After planning and preparation of all necessary tools and materials, you can begin to create a system of drainage water with their hands. The inner drainage of the basement is not much different from the outside. There is also a certain depth is laid drains, which will bring water outside of the basement. The difficulty is that all the work will be carried out in domestic premises, which may not always be enough free space.

If the basement has a small volume, it is possible to use a slightly simplified scheme. The main difference between supply and exhaust air duct is that it delivers and removes air with a single design, which has both exhaust and supply channel. However, in this case will be confined to only a small volume of air.

The outer layer of insulation not only performs a heat insulating function, but also protects the waterproofing from mechanical and thermal damage. With insulation from the inside penetrating through the water vapor will turn into moisture at the junction with the wall, which can lead to the accumulation of moisture, smudges on finishing coatings and unpleasant smell in the room. And disadvantages of internal insulation not be immediately apparent, but over time.

Often, to increase the temperature of the air homeowners use electric heaters, while in the basement they look bulky and not always solve the problem. A good solution will be held in the basement of the heating system, however, from a technical point of view is the massive amount of work. Read related articles on the subject of Winterize basement windows

Basement to build more complicated if you are not an expert in this matter. Before the construction of the basement of the foam it is also important to choose its location. Proper organization of the construction process will allow you to get a good result, that is, to preserve the original taste of pickles from the cellar or the functionality of the tools stored in the basement out of foam blocks, and to create out of the basement the whole separate rooms.

Leave a Reply