Outside basement window covers

The basement of a country house – one of his major premises. In a country house it can be used for technical needs – the garage, boiler room, water meter unit, Laundry facilities. Or for leisure, placing in a swimming pool, billiard room, sauna, gym, wine cellar, workshop and other auxiliary premises (storage rooms, etc.), which you would not like to see in the first or higher floors of a cottage or a bath. See below to learn more about Outside basement window covers

Many people install in the basement billiard, gyms or even swimming pool, only trust business should be highly qualified specialists that are able to ensure the safety and reliability of its construction. Because errors can lead to basement flooding, subsidence or deformation of the Foundation. Browse some photo of Outside basement window covers

Basements and high underground is built on dry soil. Often in rural homes, the floors arranged on the joists, which are placed on the brick pillars, and they rest directly on the ground. In this case, under the floor boards formed the underground, the height of which is typically 150-250 mm. If the height of the underground is over, it will increase heat loss if it is less, it will deteriorate underground ventilation.

The design of the basement includes architectural solutions, which consist of detailed planning of construction, provide for the use of any kind of materials (brick, ceramic blocks, aerated concrete, etc.). Discusses the various options of the roof (open in the form of a canopy, closed), is performed if necessary, truss system, attention is paid to sound insulation, interior and exterior decoration, calculated the estimated amount of the costs. It is also possible the design of underground garages and Parking lots.

To build a basement under the garage for a start you need to develop the project. Ideally, plan to work on creating the basement you need before you begin the construction and equipping of the garage. This will allow you to choose the most suitable way of laying the Foundation, consider high-quality ventilation top and bottom areas and also deliver reliable waterproofing.

The excavation for the basement digs to a depth of not less than 2.1 m (if in the underground level of the planned unit boiler – 2.5 m). In addition, it is desirable that a basement was located under the whole area of the building. You can build and a partial basement – half or even one third the area of the house or under a room.

The main enemy of the Foundation of any home is the groundwater and meltwater. Moisture destroys the rebar of reinforced concrete structure, when the load on them in thousands of tonnes may result in premature failure of the elements of which they consist. Waterproofing the outside and penetrating waterproofing basement from the inside is not a whim but an urgent need, which will ensure the safety of the entire structure.

After the spacecraft made a plan and made calculations of the basement walls, you can start immediate construction. To basement walls were reliable, it is necessary to use the technology of casting monolithic strip Foundation on a sand cushion. The thickness of walls constructed in a basement may vary from 200 to 400 mm, depending on soil and number of storeys of the structure.

Reinforcement, monolithic walls of the basement can be executed independently. If you add the reinforcement details in the concrete, it of simple material becomes particularly strong. Reinforcement concrete walls is performed with the help of formwork and frame. To make the reinforced net can be a day after the flooding of the basement. All wall surfaces must be mounted vertically and in corners must be especially strong ligament.

If you wish to make a more efficient and fast drainage system, it is possible to provide for the installation of the special pump. The drainage unit is able to pump out all the water from the basement. But it is worth remembering that these pumps cost money and require manual control (turn on and off it by yourself). Therefore, it is better and cheaper to make gravity flow drainage system.

In fact, ventilation is a system of pipes or shafts to ensure the normal parameters of humidity, temperature and ventilation in the house. The ventilation of the basement of a private house may be compulsory and consist of a network of ventilation ducts with the supply device and an exhaust fan, and can be natural and consist of a supply and exhaust pipe.

The outer layer of insulation not only performs a heat insulating function, but also protects the waterproofing from mechanical and thermal damage. With insulation from the inside penetrating through the water vapor will turn into moisture at the junction with the wall, which can lead to the accumulation of moisture, smudges on finishing coatings and unpleasant smell in the room. And disadvantages of internal insulation not be immediately apparent, but over time.

If the basement will be used as a room, for example, gym, playroom or office, this room is supported by a complete system of heating – is an offshoot of the General heating system of the house. Then the heating of the basement of a private home is one of the types of fuel: solid, gaseous or liquid. Also in this room is possible to install an independent boiler or electric heating. Read related articles on the subject of Outside basement window covers

It is worth noting that to do basements in existing buildings is not recommended because it will cause high construction costs. In addition, increase the risk of damage to the Foundation of the building, especially if the device runs basements with their hands.

Leave a Reply