Outdoor basement window covers

The basement of a country house – one of his major premises. In a country house it can be used for technical needs – the garage, boiler room, water meter unit, Laundry facilities. Or for leisure, placing in a swimming pool, billiard room, sauna, gym, wine cellar, workshop and other auxiliary premises (storage rooms, etc.), which you would not like to see in the first or higher floors of a cottage or a bath. See below to learn more about Outdoor basement window covers

It is considered that the construction of basement costing too much. But upon closer inspection, it turns out that all numbers in this case, the arguments are insufficiently thorough. Utility rooms are needed in any home. They will be made in the form of a basement or spread out in width, as this allows the site — it should be decided in each case individually. House with a basement always has more value. Browse some photo of Outdoor basement window covers

The construction of the basement is the first stage of construction of a private house, unless, of course, not to consider the Foundation and planning of the territory. In some situations, the construction of the Foundation is just the beginning of the construction of the basement – such is the approach chosen in the construction of low and light buildings. The whole process of construction of basements can be divided into three main stages: this is the digging (excavation device), concrete Foundation pouring and the construction of basement walls, which in turn are part of the Foundation.

Projects single-storey houses with a basement can be called the most common. The basement here is typically used to accommodate boilers, communication systems, etc. During the construction of the basement, special attention should be paid to the location of groundwater and the level of freezing of the soil, as these indicators influence the depth of the base under the house and the depth of the basement. If you do not consider these parameters when raising the groundwater in the basement moisture appears, which is going to be quite difficult.

The Foundation should be doing the most robust and reliable that its walls could successfully resist the horizontal shifts due to the pressure of the surrounding soil. As a Foundation base is recommended to use a pillow of in-situ concrete, associated with ribbon cage. As the weight of the slab is large enough, the sole should be broad.

The excavation for the basement digs to a depth of not less than 2.1 m (if in the underground level of the planned unit boiler – 2.5 m). In addition, it is desirable that a basement was located under the whole area of the building. You can build and a partial basement – half or even one third the area of the house or under a room.

The main enemy of the Foundation of any home is the groundwater and meltwater. Moisture destroys the rebar of reinforced concrete structure, when the load on them in thousands of tonnes may result in premature failure of the elements of which they consist. Waterproofing the outside and penetrating waterproofing basement from the inside is not a whim but an urgent need, which will ensure the safety of the entire structure.

The construction of the walls of the blocks is perhaps the most convenient system for construction of basement walls. But there is a lot of work. Because each unit will have level walls, as well as the vertical and horizontal axes. Therefore, as in brickwork, to lay the blocks, starting with the corners. To reliably bond the blocks together typically use special adhesive solution.

Reinforcement of walls enables the whole building or its individual structures to withstand various loads: pressure, torsion and bending. Also, this procedure increases the service life of products and enhances their performance. Rebar is made from special grades of steel. It must have high wear resistance and resistance to various deformations. Feature of any valve is that it cannot be welded, can only be linked.

The purpose of external drainage, the redirection of groundwater. There are two possible variant of the device of drainage path: drainage wall and ring. The first is built next to the Foundation walls with old houses is unacceptable, as it threatens the destruction of their base.

When designing a home it is important to pay sufficient attention to such important point, as the ventilation of the basement. In a private home, this issue is addressed simply by using the device of vents arranged in basement part of the Foundation. Vents, otherwise known as prospirits, you need to supply grids with small cells to the basement are unable to penetrate rodents, when holes remain open in the warm season. With the onset of cold weather, produhi should be sealed tightly.

The outer layer of insulation not only performs a heat insulating function, but also protects the waterproofing from mechanical and thermal damage. With insulation from the inside penetrating through the water vapor will turn into moisture at the junction with the wall, which can lead to the accumulation of moisture, smudges on finishing coatings and unpleasant smell in the room. And disadvantages of internal insulation not be immediately apparent, but over time.

Most often used are fairly simple, and at the same time very effective two-pipe heating system with natural circulation of coolant. It allows you to efficiently heat the home without using additional equipment – electric circulation pumps. The reason for the popularity of this system of heating of private houses due to the fact that there are cases of power failures – and in this case (without electricity) system to work simply can not. Read related articles on the subject of Outdoor basement window covers

Only well-equipped basement will be dry, without any smell of damp, and only use it as a full additional floor. It equipped with various storage rooms and a full room – boiler room, Laundry room, bath, wine cellar, Billiards room, etc.

Leave a Reply