Making basement windows larger

The basement of a country house – one of his major premises. In a country house it can be used for technical needs – the garage, boiler room, water meter unit, Laundry facilities. Or for leisure, placing in a swimming pool, billiard room, sauna, gym, wine cellar, workshop and other auxiliary premises (storage rooms, etc.), which you would not like to see in the first or higher floors of a cottage or a bath. See below to learn more about Making basement windows larger

Many people install in the basement billiard, gyms or even swimming pool, only trust business should be highly qualified specialists that are able to ensure the safety and reliability of its construction. Because errors can lead to basement flooding, subsidence or deformation of the Foundation. Browse some photo of Making basement windows larger

The construction of the basement is the first stage of construction of a private house, unless, of course, not to consider the Foundation and planning of the territory. In some situations, the construction of the Foundation is just the beginning of the construction of the basement – such is the approach chosen in the construction of low and light buildings. The whole process of construction of basements can be divided into three main stages: this is the digging (excavation device), concrete Foundation pouring and the construction of basement walls, which in turn are part of the Foundation.

The design of the basement includes architectural solutions, which consist of detailed planning of construction, provide for the use of any kind of materials (brick, ceramic blocks, aerated concrete, etc.). Discusses the various options of the roof (open in the form of a canopy, closed), is performed if necessary, truss system, attention is paid to sound insulation, interior and exterior decoration, calculated the estimated amount of the costs. It is also possible the design of underground garages and Parking lots.

The Foundation should be doing the most robust and reliable that its walls could successfully resist the horizontal shifts due to the pressure of the surrounding soil. As a Foundation base is recommended to use a pillow of in-situ concrete, associated with ribbon cage. As the weight of the slab is large enough, the sole should be broad.

The excavation for the basement digs to a depth of not less than 2.1 m (if in the underground level of the planned unit boiler – 2.5 m). In addition, it is desirable that a basement was located under the whole area of the building. You can build and a partial basement – half or even one third the area of the house or under a room.

Basement waterproofing should be carried out in several stages. In the beginning it is necessary to conduct surveys of the basement. If the basement already has water then it is necessary to completely drain it, then check the condition of the subfloor (slab) for strength, check the junction floor-wall, condition of basement walls. To develop recommendations on waterproofing a basement.

The most reliable will be a monolithic wall. They still at the stage of creating the armature plate make the vertical reinforcement bars: outer – length 1.5-1.7 m, inner 1.2-1.3 m. When the base plate attains 70% of its strength, continue to knit the reinforcing frame in accordance with the project. Reinforced inner and the outer walls serve as ribs for slab Foundation. Height of basement walls may be different, depending on the destination premises.

Perimeter walls the best way to do solid, and the reinforcement of basement walls will be the key to his long life. Don’t forget that fittings must be laid before pouring the basement floor. I should add that the reinforcement must be done, regardless of the thickness of the future walls. As reinforcement best suited to the 12 mm rods, the first row which must be mounted in 5-7 cm from the soil surface. The greatest strength of the wall will give a double reinforcing mesh. The size of each cell should not exceed 40×40 cm.

After planning and preparation of all necessary tools and materials, you can begin to create a system of drainage water with their hands. The inner drainage of the basement is not much different from the outside. There is also a certain depth is laid drains, which will bring water outside of the basement. The difficulty is that all the work will be carried out in domestic premises, which may not always be enough free space.

If the height of the basement exceeds 2 meters, and its area is quite impressive, it is better to have a facility of ventilation, called natural. It is based on the temperature difference in the basement air and outside. It is sufficient to include in the design of the building, two of the ventilation duct, which would be sufficient for the device of ventilation.

In the underground part of the house has a fifth of the total teplopoteri. The lack of thermal insulation of the basement will lead to significant heat loss throughout the house. The insulation will protect the walls of the basement from freezing, prevent the appearance of dampness and mould development. Theoretically, you can insulate the basement the outside and inside, but more efficient continuous exterior insulation on the perimeter. Internal insulation is recommended, use only if you the outer.

Often, to increase the temperature of the air homeowners use electric heaters, while in the basement they look bulky and not always solve the problem. A good solution will be held in the basement of the heating system, however, from a technical point of view is the massive amount of work. Read related articles on the subject of Making basement windows larger

To the operating room, you are ready after drying and prophylactic disinfection. In this case, suitable fire to the dry alcohol in the form of tablets (10 pieces). Here many things will affect the depth of the cellar and the proximity of groundwater, and it will have to define you. The cellar device troublesome and the price will depend on materials used and location. In a private house get it much cheaper.

Leave a Reply