Insulate basement windows

The basement of a country house – one of his major premises. In a country house it can be used for technical needs – the garage, boiler room, water meter unit, Laundry facilities. Or for leisure, placing in a swimming pool, billiard room, sauna, gym, wine cellar, workshop and other auxiliary premises (storage rooms, etc.), which you would not like to see in the first or higher floors of a cottage or a bath. See below to learn more about Insulate basement windows

The properly designed basement will bring you many advantages when storing and preserving products. First, the basement frees up additional space in your home, which can be used for other purposes, and, second, the food stocks will not lose their flavor in the cold season and will not be exposed to sunlight. Therefore, we consider how to equip a basement on the dacha with his own hands. Browse some photo of Insulate basement windows

The height of the basement: technical premises take from 1.9 to 2.2 m. If you are going to do from the basement of a dwelling, the height may be equal to the height of the floor or just below (2,5-2,7 m). At the close inception of the groundwater to the ground surface basement need to build from solid reinforced concrete (floor, walls). It is better to take concrete below grade M500 (or make concrete using cement grade M500).

Before you start to perform the work necessary to perform geological studies to determine the groundwater level. This will help to establish the necessary depth of the basement and to solve some building issues. If the level is low you can dig a deep basement with high water are close to the surface) is constructed underground, or additionally constructed drainage ditch. After running the drawing and calculations of the future basement.

To build a basement under the garage for a start you need to develop the project. Ideally, plan to work on creating the basement you need before you begin the construction and equipping of the garage. This will allow you to choose the most suitable way of laying the Foundation, consider high-quality ventilation top and bottom areas and also deliver reliable waterproofing.

Because excavation for construction of the Foundation is a very time consuming job, mostly used excavator. Before excavation it is desirable to remove the useful layer of soil. Ditch digging 30 cm more than the approved size of the Foundation. Part of the ground will be useful for back filling, so no need to take out all the soil excavated from the pit from the site. The bottom of the pit and rams.

Protection of the basement from the water – one of the main tasks in its construction. It includes a range of measures to ensure the water tightness of basement walls and floor as well as the prevention of rise of water inside the structure through the capillaries. Most reliable waterproofing can be done only at the stage of construction.

After the spacecraft made a plan and made calculations of the basement walls, you can start immediate construction. To basement walls were reliable, it is necessary to use the technology of casting monolithic strip Foundation on a sand cushion. The thickness of walls constructed in a basement may vary from 200 to 400 mm, depending on soil and number of storeys of the structure.

Reinforcement of walls enables the whole building or its individual structures to withstand various loads: pressure, torsion and bending. Also, this procedure increases the service life of products and enhances their performance. Rebar is made from special grades of steel. It must have high wear resistance and resistance to various deformations. Feature of any valve is that it cannot be welded, can only be linked.

If the basement area is large, have to pave multiple lines of the drains. The optimal distance between them was 3-3. 5 m. If the length of the wall does not exceed 4-5 m, the pipe is laid only along them. Therefore, the first stage of work is dependent on the configuration and size of the house. Or will it be markings under the line of the drains, or checking hydrorunner degree and direction of slope of the floor.

How to adjust the humidity in the basement? For this purpose, the mankind has already invented ventilation. Usually this useful site provides before the start of construction of the house. Vents (produhi), which are available in the basement part of the Foundation of almost any buildings, just play the role of ventilation. If the house is not yet built, this method of ventilation will be a smart decision, because does not require additional costs and is fully functional.

The outer layer of insulation not only performs a heat insulating function, but also protects the waterproofing from mechanical and thermal damage. With insulation from the inside penetrating through the water vapor will turn into moisture at the junction with the wall, which can lead to the accumulation of moisture, smudges on finishing coatings and unpleasant smell in the room. And disadvantages of internal insulation not be immediately apparent, but over time.

Pretty easy to do just water heating all over the house and in the basement. Why choose this type of heating. Arrange heating of this kind is possible using the gas boiler and electric. Here, of course, can not do without drawbacks. Since the space is heated by steam, the highest temperature will remain at the top of the room. And of course there are benefits: the system will always have hot water. Read related articles on the subject of Insulate basement windows

If the basement is built with his own hands, cash costs will go only to the materials and the necessary tools. Everything will depend on the size of the room and of course the professionalism of the performers. If to involve professionals from construction machinery, the costs will rise considerably.

Leave a Reply