How to install basement windows

The basement of a country house – one of his major premises. In a country house it can be used for technical needs – the garage, boiler room, water meter unit, Laundry facilities. Or for leisure, placing in a swimming pool, billiard room, sauna, gym, wine cellar, workshop and other auxiliary premises (storage rooms, etc.), which you would not like to see in the first or higher floors of a cottage or a bath. See below to learn more about How to install basement windows

Many people install in the basement billiard, gyms or even swimming pool, only trust business should be highly qualified specialists that are able to ensure the safety and reliability of its construction. Because errors can lead to basement flooding, subsidence or deformation of the Foundation. Browse some photo of How to install basement windows

Basements and high underground is built on dry soil. Often in rural homes, the floors arranged on the joists, which are placed on the brick pillars, and they rest directly on the ground. In this case, under the floor boards formed the underground, the height of which is typically 150-250 mm. If the height of the underground is over, it will increase heat loss if it is less, it will deteriorate underground ventilation.

Before you start to perform the work necessary to perform geological studies to determine the groundwater level. This will help to establish the necessary depth of the basement and to solve some building issues. If the level is low you can dig a deep basement with high water are close to the surface) is constructed underground, or additionally constructed drainage ditch. After running the drawing and calculations of the future basement.

When building the Foundation for a country house it is worth considering the many climatic and geological conditions: the proximity of groundwater to the ground surface level, the tendency of the soil to deformation, and frost heave to. If the water table near the ground surface and is above freezing, there is a considerable risk of basement flooding, subsidence and destruction of the entire building. To avoid this, you need to spend on the site drainage works and to choose the right Foundation design for your home.

To make a future home large basement, you must excavate, and using formwork to build in this strip Foundation, so that it was located under each of the walls. In addition to filling concrete into the formwork, this method of construction it is possible to use ready-made concrete blocks. But then definitely need a crane.

Basement waterproofing should be carried out in several stages. In the beginning it is necessary to conduct surveys of the basement. If the basement already has water then it is necessary to completely drain it, then check the condition of the subfloor (slab) for strength, check the junction floor-wall, condition of basement walls. To develop recommendations on waterproofing a basement.

For the construction of walls can be used bricks, foam concrete blocks and other suitable materials. It depends on the design of your home. As soon as the wall construction is completed, they must be isolated from water penetration from the outside. For this purpose, various waterproofing materials: roll of insulators, bitumen mastic, etc.

Reinforcement, monolithic walls of the basement can be executed independently. If you add the reinforcement details in the concrete, it of simple material becomes particularly strong. Reinforcement concrete walls is performed with the help of formwork and frame. To make the reinforced net can be a day after the flooding of the basement. All wall surfaces must be mounted vertically and in corners must be especially strong ligament.

If you wish to make a more efficient and fast drainage system, it is possible to provide for the installation of the special pump. The drainage unit is able to pump out all the water from the basement. But it is worth remembering that these pumps cost money and require manual control (turn on and off it by yourself). Therefore, it is better and cheaper to make gravity flow drainage system.

If the height of the basement exceeds 2 meters, and its area is quite impressive, it is better to have a facility of ventilation, called natural. It is based on the temperature difference in the basement air and outside. It is sufficient to include in the design of the building, two of the ventilation duct, which would be sufficient for the device of ventilation.

Insulation for exterior insulation must meet two requirements: does not absorb moisture and does not react to the heaviness of the soil, that is not crumpled under her weight. Both can you say about extruded polystyrene. From the usual polystyrene it has a completely closed cell, which ensures its tightness, strength and endurance. Slabs of mineral wool is not used because of their creasing when backfilling with soil, and high levels of moisture absorption.

Pretty easy to do just water heating all over the house and in the basement. Why choose this type of heating. Arrange heating of this kind is possible using the gas boiler and electric. Here, of course, can not do without drawbacks. Since the space is heated by steam, the highest temperature will remain at the top of the room. And of course there are benefits: the system will always have hot water. Read related articles on the subject of How to install basement windows

The construction of the basement in the house — a problem faced by every owner of land. Imagine a cottage without a basement is almost impossible. The construction of the basement with their hands can easily solve the urgent problem of a lack of useful site and to get rid of many problems.

Leave a Reply