Glass block basement windows

The basement of a country house – one of his major premises. In a country house it can be used for technical needs – the garage, boiler room, water meter unit, Laundry facilities. Or for leisure, placing in a swimming pool, billiard room, sauna, gym, wine cellar, workshop and other auxiliary premises (storage rooms, etc.), which you would not like to see in the first or higher floors of a cottage or a bath. See below to learn more about Glass block basement windows

It is considered that the construction of basement costing too much. But upon closer inspection, it turns out that all numbers in this case, the arguments are insufficiently thorough. Utility rooms are needed in any home. They will be made in the form of a basement or spread out in width, as this allows the site — it should be decided in each case individually. House with a basement always has more value. Browse some photo of Glass block basement windows

If a basement is planned location of the residential rooms, the height of basement walls must be at least 2.5 – 2.7 m. If the groundwater are very close to the surface, the floor and walls is better to build from such a strong material like concrete. As for the type of concrete, it should be M500, you can also make concrete on your own, using cement of the same brand (M500).

Preparation of preliminary designs of the basement includes the following information: basic drawings, taking into account the layout of the site of construction, number of storeys and basic dimensions of the future construction, the existence of additional add-ins, presence of a basement and the inspection pits and their characteristics. Is determined by the configuration of the entrance gate, the presence of additional inputs. Given the calculation of insolation considers the number, size and location of window openings. Also, the thumbnails in the design of the garage should be taken into account the individual layout of internal areas, taking into account the wishes and needs of the customer.

The construction of the basement under the house requires additional labor and increases the consumption of materials. Therefore it is necessary to comprehensively consider options for the installation of foundations to reduce cost without loss of reliability and durability of the structure. Types of foundations: pile Foundation, raft Foundation, strip Foundation.

Development of the Foundation pit. For this we need a backhoe and dump truck for the removal of excess soil. There are few secrets. But the soil it is necessary to take not completely but only 2/3. The remaining third is still useful to us. Digging a Foundation for a house with a basement is done based on the design size of the house, adding roughly one and a half meters at the edges, so that later you can safely seal the resulting structure.

Protection of the basement from the water – one of the main tasks in its construction. It includes a range of measures to ensure the water tightness of basement walls and floor as well as the prevention of rise of water inside the structure through the capillaries. Most reliable waterproofing can be done only at the stage of construction.

Since the main enemy of a basement is groundwater, the wall material should be strong and the most waterproof. Sometimes you can find recommendations to build the basement walls of the Foundation blocks. Although this solution is cheaper than the monolithic walls, but it is only suitable for sites with low groundwater level. Special attention in this case should be given to waterproofing the walls.

If you need to reinforce the basement walls, we can handle the work independently, without resorting to expensive services. The main thing – to know the technology and features of the reinforcement, monolithic walls. By adding a simple reinforcement concrete becomes more durable and reliable concrete. This applies when the device bearing structures (such as walls of buildings).

Note that the carrying out of drainage works to drain the basement of the house will significantly reduce the area of the basement. First of all you need to pay attention to its height: it will inevitably decrease by 20-30 cm, as the drainage from the basement without laying drainage pipes and floor elevation will not work. The only way to preserve the aesthetic appeal of a well-ordered space.

If the area of the basement is of considerable size, and the height of the ceiling exceeds 2 meters, it is best to provide in the construction of supply and exhaust ventilation. This system of ventilation is based on temperature difference inside and outside the premises. The design of the building will be sufficient to provide two air channel

Insulation for exterior insulation must meet two requirements: does not absorb moisture and does not react to the heaviness of the soil, that is not crumpled under her weight. Both can you say about extruded polystyrene. From the usual polystyrene it has a completely closed cell, which ensures its tightness, strength and endurance. Slabs of mineral wool is not used because of their creasing when backfilling with soil, and high levels of moisture absorption.

Pretty easy to do just water heating all over the house and in the basement. Why choose this type of heating. Arrange heating of this kind is possible using the gas boiler and electric. Here, of course, can not do without drawbacks. Since the space is heated by steam, the highest temperature will remain at the top of the room. And of course there are benefits: the system will always have hot water. Read related articles on the subject of Glass block basement windows

If the basement is built with his own hands, cash costs will go only to the materials and the necessary tools. Everything will depend on the size of the room and of course the professionalism of the performers. If to involve professionals from construction machinery, the costs will rise considerably.

Leave a Reply