Custom basement windows

The basement of a country house – one of his major premises. In a country house it can be used for technical needs – the garage, boiler room, water meter unit, Laundry facilities. Or for leisure, placing in a swimming pool, billiard room, sauna, gym, wine cellar, workshop and other auxiliary premises (storage rooms, etc.), which you would not like to see in the first or higher floors of a cottage or a bath. See below to learn more about Custom basement windows

Most often in the basement, organize the warehouse, or use it for storage. If your garden plot you collect a good harvest, you won’t have the headache of where to store the gifts of nature and seaming. At a depth of 1.5 – 2 m keeps stable temperature about 5 degrees in winter and 10 degrees in summer. And this is the perfect conditions for food storage. Browse some photo of Custom basement windows

If a basement is planned location of the residential rooms, the height of basement walls must be at least 2.5 – 2.7 m. If the groundwater are very close to the surface, the floor and walls is better to build from such a strong material like concrete. As for the type of concrete, it should be M500, you can also make concrete on your own, using cement of the same brand (M500).

Preparation of preliminary designs of the basement includes the following information: basic drawings, taking into account the layout of the site of construction, number of storeys and basic dimensions of the future construction, the existence of additional add-ins, presence of a basement and the inspection pits and their characteristics. Is determined by the configuration of the entrance gate, the presence of additional inputs. Given the calculation of insolation considers the number, size and location of window openings. Also, the thumbnails in the design of the garage should be taken into account the individual layout of internal areas, taking into account the wishes and needs of the customer.

The Foundation should be doing the most robust and reliable that its walls could successfully resist the horizontal shifts due to the pressure of the surrounding soil. As a Foundation base is recommended to use a pillow of in-situ concrete, associated with ribbon cage. As the weight of the slab is large enough, the sole should be broad.

All construction works should start with marking the site and the completion of the excavation for the Foundation. If the markup is verified, you can start digging trenches for the Foundation. Around the perimeter of the house trenches have the same depth and width. When the desired height of the basement in the 1.7-1.9 m depth of the trench should be about 1.7 m. the Excavated earth should be ignored on the outside, then it will be used in backfilling. When digging trenches, you must carefully monitor the quality of walls: they should be smooth and have no ledges that could lead to the collapse of the soil.

Waterproofing of underground (ground) floor of a private house, i.e. the basement (cellar, basement, underground) must be done at the construction stage. But, if the problem is already in the process of operation, it will have to perform internal waterproofing of walls, floor and even ceiling of the basement, i.e., from inside the premises.

Since the main enemy of a basement is groundwater, the wall material should be strong and the most waterproof. Sometimes you can find recommendations to build the basement walls of the Foundation blocks. Although this solution is cheaper than the monolithic walls, but it is only suitable for sites with low groundwater level. Special attention in this case should be given to waterproofing the walls.

If you need to reinforce the basement walls, we can handle the work independently, without resorting to expensive services. The main thing – to know the technology and features of the reinforcement, monolithic walls. By adding a simple reinforcement concrete becomes more durable and reliable concrete. This applies when the device bearing structures (such as walls of buildings).

If you wish to make a more efficient and fast drainage system, it is possible to provide for the installation of the special pump. The drainage unit is able to pump out all the water from the basement. But it is worth remembering that these pumps cost money and require manual control (turn on and off it by yourself). Therefore, it is better and cheaper to make gravity flow drainage system.

If the basement has a small volume, it is possible to use a slightly simplified scheme. The main difference between supply and exhaust air duct is that it delivers and removes air with a single design, which has both exhaust and supply channel. However, in this case will be confined to only a small volume of air.

Basement insulation on the outside is best done extruded polystyrene (PPS) or a polyurethane foam. Mineral wool completely unsuitable in this location due to its ability to absorb water. It is not necessary to insulate ordinary granular polystyrene, because it is also capable of a slight amount of moisture to pass.

After work on basement insulation can begin to address the heating issue. Of course, ideally, a source of heating the entire home must be located in the basement. But to install such a heating system requires a specialized ventilation system and ceilings having a height of 3 meters. When the location of the boiler in the basement of the forced and natural circulation of the coolant. Read related articles on the subject of Custom basement windows

Only well-equipped basement will be dry, without any smell of damp, and only use it as a full additional floor. It equipped with various storage rooms and a full room – boiler room, Laundry room, bath, wine cellar, Billiards room, etc.

Leave a Reply