Basement window insulation covers

The basement of a country house – one of his major premises. In a country house it can be used for technical needs – the garage, boiler room, water meter unit, Laundry facilities. Or for leisure, placing in a swimming pool, billiard room, sauna, gym, wine cellar, workshop and other auxiliary premises (storage rooms, etc.), which you would not like to see in the first or higher floors of a cottage or a bath. See below to learn more about Basement window insulation covers

In the basements of homes suit different premises: garages, pantries, baths (including a pool), workshop, Laundry and storage area. The basement is used as a vegetable store, the storage of the tubers and bulbs of flowers. Many people throw in the mushrooms, trying to breed exotic birds and animals. The basement seems to be a place for such studies, which are impossible to do in the premises. Browse some photo of Basement window insulation covers

The height of the basement: technical premises take from 1.9 to 2.2 m. If you are going to do from the basement of a dwelling, the height may be equal to the height of the floor or just below (2,5-2,7 m). At the close inception of the groundwater to the ground surface basement need to build from solid reinforced concrete (floor, walls). It is better to take concrete below grade M500 (or make concrete using cement grade M500).

There are standard designs of basement s, in which you can make adjustments for site-specific, and individual. However, in any case when they are created need to consider one aspect, because it is easier to think of everything at the initial stage than, for example, to break down walls or other construction. In addition, the project is targeting each stage of the construction of the house. Of how well it was made and whether it was taken into account, will depend on the entire outcome and quality of life in the home as a whole.

To begin construction on the site with a high groundwater level, it is necessary to correctly design the Foundation. When the Foundation design must consider not only the groundwater level, and depth of soil freezing. And also what type of Foundation is suitable for soil with high groundwater level: strip Foundation, slab Foundation, pier Foundation.

Digging trenches for the Foundation or basement is keeping all features of the project. Development of pits should include the necessity of removal of soil from the site and its disposal in landfills. Construction company Etalon, if needed, ensures the removal of soil during excavation works.

Basement waterproofing should be carried out in several stages. In the beginning it is necessary to conduct surveys of the basement. If the basement already has water then it is necessary to completely drain it, then check the condition of the subfloor (slab) for strength, check the junction floor-wall, condition of basement walls. To develop recommendations on waterproofing a basement.

Basement walls, as a rule, is combined with strip foundations, and the ceiling — with a ground floor. The thickness of the walls at their depth more than 1 m is determined from the lateral pressure of soil. Dry soils have the basement walls post concrete and reinforced concrete. To increase the strength of the walls, built of bricks and concrete blocks, in horizontal seams of a laying, 30-40 cm in height, put the reinforcement mesh and top and bottom walls along their perimeter, arrange reinforced belt. In addition to stability, the basement walls should have good heat-quality and reliable waterproofing.

Reinforcement of basement walls is quite a complex construction process. In this case the whole building or its individual structures is given increased strength from the pressure, torsion and bending moment. In this case, increases the life of the structure and increase its performance.

If you wish to make a more efficient and fast drainage system, it is possible to provide for the installation of the special pump. The drainage unit is able to pump out all the water from the basement. But it is worth remembering that these pumps cost money and require manual control (turn on and off it by yourself). Therefore, it is better and cheaper to make gravity flow drainage system.

If the height of the basement exceeds 2 meters, and its area is quite impressive, it is better to have a facility of ventilation, called natural. It is based on the temperature difference in the basement air and outside. It is sufficient to include in the design of the building, two of the ventilation duct, which would be sufficient for the device of ventilation.

Insulation for exterior insulation must meet two requirements: does not absorb moisture and does not react to the heaviness of the soil, that is not crumpled under her weight. Both can you say about extruded polystyrene. From the usual polystyrene it has a completely closed cell, which ensures its tightness, strength and endurance. Slabs of mineral wool is not used because of their creasing when backfilling with soil, and high levels of moisture absorption.

The procedure for heating floor has its own quirks and nuances. Before the arrangement of heating it is recommended to take the necessary measures, which will not allow the heat to go out through the wall. This is done the insulation and waterproofing of exterior of the walls. To accomplish these goals, we need to dig out the Foundation. Read related articles on the subject of Basement window insulation covers

The construction of the basement in the house — a problem faced by every owner of land. Imagine a cottage without a basement is almost impossible. The construction of the basement with their hands can easily solve the urgent problem of a lack of useful site and to get rid of many problems.

Leave a Reply